|Value of Goods|
|Percentage of Deposit|
|Amount of Deposit|
|Amount of Loan|
|Term of Agreement|
|Total Amount Payable|
|Cost of Loan|
DR ATM4 Premier 26-10.5 RS Field and Brush Mower (Recoil Start)The ATM4 Premier 26-10.5 RS is the most economical of DR's 26" Roughcutter models. Featuring a 16.5 fpt (344cc) Briggs & Stratton Power Built, manual start engine with cast-iron cylinder sleeve and over head valve, if you have hilly terrain to clear and maintain, in tight areas where a lawn tractor won't fit, the Premier 26-10.5 RS model from DR could be the one for you.
With its full pressure oil pump, you can mow with ease on slopes up to 20 degrees in gradient and be assured of plenty of good lubrication for the legendary Briggs & Stratton engine, without the risk of oil or fuel starvation. The engine, with cast iron cylinder sleeve and overhead valve, is recoil starting and produces 16.5 foot pounds torque. The DR Premier 26-10.5 RS will chomp its way through saplings up to 2" thick, as well as 8ft tall weeds and brush and 4ft high grass.
Equipped with a 66cm (26") fixed cutter deck, the machine is wide enough for effective clearing but is still very manoeuvrable. Each tyre features superior lugged treads and is filled with one pint of sealant, making the tyres highly resistant to puncture from sharp sticks, stubble, glass and even nails.
All the operating functions for the machine are located on the control panel or on the hand grips. They are designed to optimise operator comfort with everything at your fingertips, including operator presence, throttle, gear shift, blade engagement and brakes.
Busting tough brush is one thing, withstanding years of abuse is another - DR field and brush mowers deliver on both counts.
Features of DR ATM4 Premier 26-10.5 RS Field and Brush Mower
Built to cut down a wide range of vegetation.
10.5hp Briggs & Stratton PowerBuilt Engine
The legendary power, performance and durability of Briggs & Stratton® engines make them the only ones used on DR's field and brush mowers. With this model, you get a 16.5fpt (344cc) PowerBuilt engine with manual start, cast-iron cylinder sleeve and overhead valve.
26" Fixed Deck
The fixed 26" deck is wide enough for effective clearing, but is still very manoeuvrable.
DR decks are enclosed on three sides, so that cut material is chopped and re-chopped, reducing grass and brush to a fine mulch. This means less material is left behind in your field, and none of the windrows you get with side-discharging mowers.
Gear-Driven Transmission: Lock it in and Rip it up!
Unlike hydrostatic drives, the DR's geared transmission lets you lock in your ground speed, leaving your hands free to steer the machine across uneven terrain (instead of fussing with touchy throttle controls as you go). With three forward gears, you can choose a fixed pace thats right for you.
Big, Lugged Tyres for Sure Traction
No other brush mower has tyres like this. Theyre the biggest (18" x 6.5" x 8"), they have superior lugged treads that pull the mower through or over just about anything, and they are sealant filled ... which means theyre highly resistant to puncture. Tough as nails, apparently!
Custom-Made Blade Spindle
Made of 1.375" thick cast iron with oversized double sealed bearings, the blade spindle is integrated into the deck housing and reinforced for vibration-free performance. Designed to provide years of maintenance-free use (and abuse!).
Commercial Grade Electric Clutch
DR's industry-leading, self-adjusting clutch is designed for easy access and quick swapping out of optional attachments. After 245 hours of testing only 10% of the life of the clutch was used up. There are no cables to stretch or idler pulleys to get out of adjustment.
Attachments Add 4-Season Versatility
Thanks to DR's quick-change coupling system, the brush mowing deck can be swapped - in just minutes - with one of the optional PTO attachments: a 42" finish mower or a 42" grader/snow blade.
Built to Take a Beating
Field and brush mowing is a bruising business, and underbuilt mowers dont survive long out where the tough stuff grows. DR machines are framed with heavy-duty, laser cut steel, and reinforce key stress spots so you get a product that will withstand years of use and abuse.
A comfortable working height is important, especially when traversing rough terrain.
Both on the control panel and on the grips, all DR field and brush mowers controls are designed to optimise operator comfort and minimise hand fatigue. Everything you need is right at your fingertips, so there is no walking around the mower to make adjustments.
Heavy-Duty Powder Coating
DR frames and decks are finished with a tough, durable powder coating that resists scratching and promotes long life.
Sealant Filled Tyres
Superior lugged treads which are sealant filled meaning theyre highly resistant to puncture from sharp sticks, stubble, glass and even nails. Each tyre contains one pint of sealant.
Specification of DR Premier 26-10.5 RS Field and Brush Mower
* Engine Make: Briggs & Stratton
* Engine Model: PowerBuilt OHV
* Displacement: 344cc
* Torque: 16.5fpt
* Horsepower: 10.5hp
* Engine Cylinders: 1, cast-iron sleeved
* Start Method: Recoil
* Propulsion: Self-propelled
* Gears: 3 forward, 1 reverse
* Width of Cut: 66cm / 26"
* Cutter Deck: Fixed - 12 gauge steel
* Blades: 1
* Clutch: Electric
* Maximum Cutting Height: 80mm
* Cutting Capacity: 4' high grass, 8' high weeds & brush, 2" thick saplings
* Handle Type: Adjustable - High 42", Low 38"
* Wheels: 2
* Tyres: 16", Sealant-filled
* Maximum Operating Angle: 20°
* Dimensions: L: 203cm x W: 76cm x H: 117cm
* Weight: 101kg
* Warranty: Machine: 2 years in residential use; 90 days in commercial use
* Engine: 2 years in residential use; 1 year in commercial use
**Video below included to show product in action - current models may differ slightly in specification and appearance. 6 Month Trial unavailable outside of USA. Not all attachments shown are available outside of USA**
Barcode / EAN: 843530005196
Carriage usually free for mainland UK
Product Type: Lawnmower , Mower Type: Rough Cutter 101.00